Thinnest LED power supply driver ROHS AC 170V - 250V for led lighting Low output ripple moises AIA-1 manufacturer from China Shenzhen yanshuoda technology co,.ltd

Thinnest LED power supply driver ROHS AC 170V - 250V for led lighting Low output ripple moises

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Thinnest LED power supply driver ROHS AC 170V - 250V for led lighting Low output ripple moises

<str

Thinnest LED power supply driver ROHS AC 170V - 250V for led lighting Low output ripple moises

Features

· Small size,High efficiency,High reliability,Long lifetime;

· IP67 rating;

· Working temperature -25~+60°C

· Protection:Overload,Short-circuit pratection,Over-temperature;

· Typical efficiency:88.5%

· Low standby power,min to 0.3W;

· Start delay design,which can reduce the starting current when multiple simulatance start;

· CE,IP67 certifide,ROHS compliant;

· Low output ripple moises.

Description:

1. Protections :Short circuit/Overload/Over temperature

2. Cooling by free air convection

3. IP67 design for indoor or outdoor installations

4. 100% full load burn-in test

5. Suitable for LED lighting

6. Products through CE& ROHS certification

7. Two years warranty

Application:

it can be used for LED strip.LED guardral tubeLED modules,LED point lighting source,LED luminous

characters,LED lighting,LED display,light Fixtur and so on

Competitive Advantage:

• IP67 protection grade
• 100% load test, built-in EMI filters
• Full range of input voltage
• output voltage accurate and stable
• Output over-voltage, over-current and short-circuit protection
• Output low ripple and noise
• Two year warranty

• Average working no trouble 50, 000 hours

Advantages

* Applicable AC input power around the world

* Protection for short circuit/over load/over voltage/over temp.

* Built-in EMI filter with tiny ripple

* 100% full load burn-in testing

* small volume high efficiency

* Conform to safety and EMC standards

* Conform to EMC standards

Specification:

MODEL		12V300W	24V300W
OUTPUT	DC VOLTAGE	12V	24V
	RATED CURRENT	25A	12.5A
	CURRENT RANGE	0~25A	0~12.5A
	RATED POWER	300W	300W
	RIPPLE & NOISE(max.) NOTE 2	350mV	400mV
	VOLTAGE TOLERANCE NOTE 3	±2%	±2%
INPUT	VOLTAGE RANGE	170~264V
	FREQUENCY RANGE	50~60Hz
	POWER FACTOR (Typ.)	PF>0.5/220VAC
	EFFICIENCY (Typ.)	86%	86%
	AC CURRENT (Typ.)	1.6A/220CAC
PROTECTION	Short circuit	Protection type : recovers automatically atter fault condition is removed
	Overload	overload protected @ 110-140% above peak rating
	Over temperature	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-30 ~ +50 ( Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 99% RH non - condensing (Waterproof)
	STORAGE TEMP., HUMIDITY	-40 ~ +80 , 10 ~ 99% RH
SAFETY & EMC	SAFETY STANDARDS	CE Mark ( LVD), IP67
	WITHSTAND VOLTAGE	I /P- OP : 1.5KVAC I /P - GND : 1.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+A1:2000; EN61000-3-2:2006; EN610000-3-3:1995+A2:2005;1955+A2; EN61347-1:2001:EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 μf &10 μf parallel capacitor. 3.Tolerance:inclues set up tolerance line regulation and load regulation.