Plastic LED Light Strips Power Supply/ Constant Voltage Dual Output Power Supply AIA-1 manufacturer from China Shenzhen yanshuoda technology co,.ltd

Place of Origin:

Guangdong, China (Mainland)

Product Detail

Model No.: AIA-1

Plastic LED Light Strips Power Supply / Constant Voltage Dual Output Power Supply

Description:</s

Plastic LED Light Strips Power Supply / Constant Voltage Dual Output Power Supply

Description:

1. Protections :Short circuit/Overload/Over temperature

2. Cooling by free air convection

3. IP67 design for indoor or outdoor installations

4. 100% full load burn-in test

5. Suitable for LED lighting

6. Products through CE& ROHS certification

7. Two years warranty

Warranty policy:

1:Warranty: 2 years.

2:100% of all delivered products will be tested before shipping by our QC staff

3:During the warranty period, we will immediately supply replacement for free.

then send it to you with your next order together.

4:After warranty period, we will guide you to repair and provide you spare parts

Specification:

MODEL		12V30W	24V30W
OUTPUT	DC VOLTAGE	12V	24V
	RATED CURRENT	2.5A	1.25A
	CURRENT RANGE	0~2.5A	0~1.25A
	RATED POWER	30W	30W
	RIPPLE & NOISE(max.) NOTE 2	100mV	100mV
	VOLTAGE TOLERANCE NOTE 3	±2%	±2%
INPUT	VOLTAGE RANGE	190~250V
	FREQUENCY RANGE	50~60Hz
	POWER FACTOR (Typ.)	PF>0.5/220VAC
	EFFICIENCY (Typ.)	81%	85%
	AC CURRENT (Typ.)	0.28A/220CAC
PROTECTION	Short circuit	Protection type : recovers automatically atter fault condition is removed
	Overload	overload protected @ 110-140% above peak rating
	Over temperature	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-30 ~ +50 ( Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 99% RH non - condensing (Waterproof)
	STORAGE TEMP., HUMIDITY	-40 ~ +80 , 10 ~ 99% RH
SAFETY & EMC	SAFETY STANDARDS	CE Mark ( LVD), IP67
	WITHSTAND VOLTAGE	I /P- OP : 1.5KVAC I /P - GND : 1.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+A1:2000; EN61000-3-2:2006; EN610000-3-3:1995+A2:2005;1955+A2; EN61347-1:2001:EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 μf &10 μf parallel capacitor. 3.Tolerance:inclues set up tolerance line regulation and load regulation.