20W White LED Power Supply DC 12V / 24V AC 90 - 250V with Aluminum Shell AIA-1 manufacturer from China Shenzhen yanshuoda technology co,.ltd

20W White LED Power Supply DC 12V / 24V AC 90 - 250V with Aluminum Shell

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

20W White LED Power Supply DC 12V / 24V AC 90 - 250V with Aluminum Shell

General Speci

20W White LED Power Supply DC 12V / 24V AC 90 - 250V with Aluminum Shell

General Specification:

• High efficiency,save energy ,protected environment
• High stability and low ripple, increase light efficiency and decrease light attenuation
• Meet to safety standard and EMC
• Assure LED stability long lift and light efficiency by constant voltage
• Passed high ,low temperature and waterproof testing.
• Integrity protection,over loading, over voltage ,over current
• 8Hrs and 100% full load burn-in test.

Installation and working environments:

• Make sure work in proper environments are stated in this Guide.

• Do not overload.

• Avoid free of load while a power supply is powered on, keep proper loading

• Always keep good ventilation

• Do not mount on wood or flammable surface

• Keep away from inflammable or explosive environments

Application:

it can be used for LED strip.LED guardral tubeLED modules,LED point lighting source,LED luminous

characters,LED lighting,LED display,light Fixtur and so on

Specification:

MODEL		12V20W	24V20W
OUTPUT	DC VOLTAGE	12V	24V
	RATED CURRENT	1.67A	0.83A
	CURRENT RANGE	0~1.67A	0~0.83A
	RATED POWER	20W	20W
	RIPPLE & NOISE(max.) NOTE 2	100mV	100mV
	VOLTAGE TOLERANCE NOTE 3	±2%	±2%
INPUT	VOLTAGE RANGE	190~250V
	FREQUENCY RANGE	50~60Hz
	POWER FACTOR (Typ.)	PF>0.5/220VAC
	EFFICIENCY (Typ.)	81%	81%
	AC CURRENT (Typ.)	0.23A/220CAC
PROTECTION	Short circuit	Protection type : recovers automatically atter fault condition is removed
	Overload	overload protected @ 110-140% above peak rating
	Over temperature	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-30 ~ +50 ( Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 99% RH non - condensing (Waterproof)
	STORAGE TEMP., HUMIDITY	-40 ~ +80 , 10 ~ 99% RH
SAFETY & EMC	SAFETY STANDARDS	CE Mark ( LVD), IP67
	WITHSTAND VOLTAGE	I /P- OP : 1.5KVAC I /P - GND : 1.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+A1:2000; EN61000-3-2:2006; EN610000-3-3:1995+A2:2005;1955+A2; EN61347-1:2001:EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 μf &10 μf parallel capacitor. 3.Tolerance:inclues set up tolerance line regulation and load regulation.